Arsir Peta

ENID

Notes · · 1 min read

UTM zones, and the grid on our print sheets

A grid in metres is easy to measure with a ruler. The price is sixty zones, and a seam wherever two of them meet.

The Universal Transverse Mercator system divides the world between 80 degrees south and 84 degrees north into 60 zones, each 6 degrees of longitude wide, numbered eastwards from the 180th meridian. Each zone has its own projection, centred on the zone's middle meridian, and its own grid in metres.

Within a zone, distortion stays small. On the central meridian the scale is 0.9996, slightly under true; it is exactly true along two lines about 180 km either side of it, and at the edge of the zone on the equator it reaches 1.00097, about a tenth of a per cent over. Eastings start at 500,000 metres on the central meridian, so they never go negative; northings start at the equator, with 10,000,000 metres added in the southern hemisphere for the same reason.

The catch is the seam. A wide country crosses several zones, and an area that straddles a boundary must either use one zone and accept more distortion on the far side, or be split. A few zones in the far north are also wider or narrower than the rule, by old agreement.

Our print sheets carry the grid of the zone the sheet's centre falls in, labelled with the zone number and N or S. A crew can then measure a distance on paper with a ruler and the scale bar, and read a position off the grid without a device.