Notes · · 1 min read
Reading a slope from contour lines
The closer the lines, the steeper the ground. With a ruler and the interval, you can put a number on it.
A slope is height gained over distance travelled. Between two neighbouring contours the height gained is the contour interval, and the distance is the gap between the lines measured on the sheet, multiplied by the scale.
On a 1:25,000 sheet with a 10 metre interval:
| Gap on the sheet | Distance on the ground | Slope | Angle |
|---|---|---|---|
| 5 mm | 125 m | 8% | 4.6° |
| 4 mm | 100 m | 10% | 5.7° |
| 2 mm | 50 m | 20% | 11.3° |
| 1 mm | 25 m | 40% | 21.8° |
| 0.5 mm | 12.5 m | 80% | 38.7° |
Per cent and degrees are easy to confuse. A slope of 100 per cent rises one metre for every metre forward, and that is 45 degrees, not 100; a 10 per cent road is under 6 degrees. Plans for vehicles and drainage usually talk in per cent, walkers and climbers in degrees, so our terrain layers state which one they show.
Measure across the lines, at right angles to them, not along a road or a path that crosses them at a slant: a path climbs more gently than the hillside it zigzags up.