Arsir Peta

ENID

Notes · · 1 min read

Grid references, eastings first

A position read off a printed grid is only useful if everyone reads it the same way, and to the same precision.

A grid reference gives the easting first and the northing second: along the corridor, then up the stairs. Reading them the other way round puts the point somewhere else entirely, often still on the sheet, which is why the mistake survives until someone arrives at the wrong place.

Precision is set by the number of digits. With grid lines every kilometre, three digits for each direction locate a square of 100 metres, four digits a square of 10 metres, and five digits a square of one metre, more than a reading by eye can justify. A full UTM position in metres is longer: six digits of easting, up to seven of northing, and the zone, as described in UTM zones.

Our print sheets set the two digits that change most, the ones a crew reads, larger than the rest of each grid label, so they can be read at a glance. The sheet's margin repeats the zone and a worked example of a reference for one point on that sheet.

Over the radio, digits are read one at a time and in two groups, eastings then northings, with a pause between. Four, seven, two; one, nine, eight is hard to mishear. Four hundred and seventy two is not.